Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AWR MWOffice Design Environment Ports

Status
Not open for further replies.
A

alejor00

Newbie level 3
Joined
Aug 20, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Medellin Colombia
Activity points
1,295
mwoffice

Im designing a UWB antenna using MWOffice, what kind of port should is the most accurate?
Thanks
 

Hello,

You are using EMSight EM simulator right?

Then always try to use the Edge Port which is caliberated,
but if you face difficulty in adding at edges of the antenna structure use the Via port (again depend on your type of excitation). But don't use Internal Port...

Upload your MWO project file (*.emp), so that I will suggest you to what port is effective...


---manju---
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top