Jun 20, 2007 #1 C controller Junior Member level 1 Joined Jul 20, 2005 Messages 16 Helped 1 Reputation 2 Reaction score 1 Trophy points 1,283 Activity points 1,421 hi all, i have made an avr jtagice clone from this site http://www.scienceprog.com/build-your-own-avr-jtagice-clone/ i try jtagice with atmega128. avrstudio is find the jtagice clone and connect it. i can erase atmega128 and read fuse bits. but i can't program a hex file or read chip. avrstudio is giving error message like this, ->entering programming mode..OK ->programming..failed ->leaving programming mode..failed or ->entering programming mode..OK ->reading..failed ->leaving programming mode..failed what is the problem? thanks..
hi all, i have made an avr jtagice clone from this site http://www.scienceprog.com/build-your-own-avr-jtagice-clone/ i try jtagice with atmega128. avrstudio is find the jtagice clone and connect it. i can erase atmega128 and read fuse bits. but i can't program a hex file or read chip. avrstudio is giving error message like this, ->entering programming mode..OK ->programming..failed ->leaving programming mode..failed or ->entering programming mode..OK ->reading..failed ->leaving programming mode..failed what is the problem? thanks..
Jun 21, 2007 #2 C controller Junior Member level 1 Joined Jul 20, 2005 Messages 16 Helped 1 Reputation 2 Reaction score 1 Trophy points 1,283 Activity points 1,421 Re: avr jtagice problem? is there anybody to help? :|