Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

audio amplifier with 2SK1058 and 2SJ162

Status
Not open for further replies.

goofers1

Junior Member level 1
Joined
Feb 22, 2002
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
47
2sk1058

Hello,

I'm looking for some schematics for an Audio-amplifier with mosfets
2SJ162 and 2SK1058.


e.g. **broken link removed**
Goof
 

2sk1058 amplifier

Try this!Shematic is for 100-150RMS.
 
2sk1058 amp

You can find lots of amplifiers (schematic and pcb layouts, several output powers) using these transistors (2SK1058 and 2SJ162) in this excelent book:

High Power Audio Amplifier Construction Manual
G. Randy Sloan

**broken link removed**

All amplifiers are hi-end, hi-quality and very low distortion amplifiers.
 

ampli 2sk1058

Hi

where are the books available in india.

thanks
arasu
 

2sj162 amplifier

See this one.
 

High Power, High Fidelity MOSFET Power Amplifier

hi averyone.. I ask about the High power Mosfet Amp of EPS disign
the output drive is 2SK1058,2SJ162
How much the maximum current or Ampere of the transformer I used? when I used +-50volts AC?
in the document they used 300VA and +-50?
it is true that the computation is 300 VA/50 VOLTS = 6 Ampere?
this is how to compute the Ampere rating of the transformer?
thanks...reply it to me
 

dear sir ,
plz also share pcb of above playmaster amplifier.thank you
yours masood
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top