Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ATtiny26L ISP Programmer - advice needed

Status
Not open for further replies.

ayeong

Full Member level 1
Joined
Dec 31, 1999
Messages
96
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
904
ponyprog attiny26l

Hi,

Anybody can recommend any programmer that can program ATtiny26L via ISP method ?

The software has to be running on Windows platform and schematics available for the hardware.

Thanks
 

isp

hi ..
have a look here **broken link removed**
for nice gui programmer
or here http://ln.com.ua/~real/avreal/descr_e.html if you want command line programmer .. i use both and avreal is very fine when integrated with e.g. iar

regards

cancel
 

Are those programmers suitable for ATtiny26L which is the low voltage version ?

Next, can they program the onboard ATtiny26L using the internal osciallator ?

Thanks
 

isp

i have not tried that ...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top