AT91RM9200 board/schematics

[whoops]

at91rm9200 board

Hi,

I`m looking for a simple board with tha AT91RM9200, or for some reference design schematics. So far I was only able to find an announcment for an Atmel board of $5000,-

On the Atmel site no schematics are available.

Any suggestions, links ?

Whoops

 

[rossi360]

at91rm9200 schematic

You can try with this

**broken link removed**

bye.

 

[chipsoid]

at91rm9200 sbc

schematic is on CD -i may send it if you want

 

[chipsoid]

at91rm9200 reference design

look

 

[hugo_nz]

at91rm9200 serial port

chipsoid, that file is available straight from the atmel website at:
h**p://www.atmel.com/dyn/products/tools_card.asp?tool_id=3193

down at the bottom of that page, or here:
http://www.atmel.com/dyn/resources/prod_documents/at91rm9200dk_design_files.zip

also:

the LOM-ARM9 board is 'open-source' as in the schematics and board design files are free and royalty free. it costs $150US + shipping from china.

if you buy one, can you please tell me if its any good, cos i might buy one too.

 

[trend]

at91rm9200-ek schematic

Anyone try out the LOM-ARM9 dev board? or any other dev board for the at91rm9200?

thanks-Lee

 

[dainis]

at91rm9200 dsn

https://www.kwikbyte.com/
https://www.ucrouter.com/english/hardware.html

 

[elcielo]

open source at91rm9200

Darrell Harmon's Single Board Computer Project

http://www.dlharmon.com/sbc.pdf

Errata for 20040720 board

DBGU serial port miswired. The AT91RM9200 schematic symbol is wrong.
Both SOT23-5 packages have wrong pinout. Need to create correct footprints to replace the ones that came with PCB
FPGA oscillator pads are mirrored on the board. Fix footprint.
Crystals are bigger than the symbol - capacitors are underneath their edges. Create more room in next revision.
Not all systems have been tested yet so there may be more.

 

[elcielo]

at91rm9200 project

**broken link removed**

2005-03-30 Bad news! Peter Antesberger stopped working on the PCB design. I can't understand this behavior, because the design was already in a final state. In addition he rejects to communicate via phone and E-mail. He is also not willing to send me the final Protel design files. What happened to this guy? He is already responsible for one year of delay for the Comet design because of some misterious phases of disappearing - I think this is the final reason to quit cooperation with him.
Is there anybody out there willing to continue with Comet?

 

[elcielo]

at91rm9200 orcad

AT91RM9200-EK Evaluation Board User Guide (with schematic)

http://www.atmel.com/dyn/resources/prod_documents/doc6103.pdf

 

[layaghi]

at91rm9200 open source

- at91rm9200-dk_schematics_orcad_9_2.dsn:
--> AT91RM9200-DK's schematics and symbols in Orcad Cadence Capture CIS 9.2.2.585 format.

- at91rm9200-dk_schematics_orcad_7_2.opj:
--> Project File associated with the DSN file Orcad Cadence 7.2 format.
PCB Design file can be viewed with Allegro FREE Viewer.

 

[hejoin]

at91rm9200 fpga

this can download from atmel site

 

[elcielo]

at91rm9200 +sbc +schematic

http://www.lomx.net/en/lom_arm9_project.htm

LOM - Linux On Module Project

Added after 16 minutes:

**broken link removed**

ITAT91RM9200 Evaluation Board