Assembly Programming for tx(TLP434A) & rx(RLP434)!!!! UR

[tschen]

tlp434a

How can i program to generate the signal pulses for the tx/rx module using a 4Mhz clock? I'm using assembly programming.

 

[davemaster]

rlp 434

Hi,

First, chose a encode / decode system.... once you do that, is only matter of making the pulses out throut the data pin of TLP434, then the RLP434 must be able to read it from its data pin and decode the data based on the coding you selected to use in your project.

good luck

 

[ctownsend]

rlp434

How can i program to generate the signal pulses for the tx/rx module using a 4Mhz clock? I'm using assembly programming.

This is exactly what you want here:

https://www.serasidis.gr/circuits/RF_remote_control/RF_remote_control.htm

This is a very good site. All of the source code is very well written and always works!
Hope it helps.
(remember the helped me button!)

Good Luck