Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Array factor calculation problem

Status
Not open for further replies.

Black-Bone

Junior Member level 1
Joined
Sep 18, 2012
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,390
Hi there, I am curious that Array factor and total gain of array is it the same or not?
if it is not the same how to calculate it.

Thank you for all helps

- - - Updated - - -

One more thing, if the separation distance of antenna is 0.65 wavelength, what would be the phase difference between them?
 

Array factor and gain are different. The Array Factor is a function of the positions of the antennas in the array and the weights used.
for calculation chk this link https://www.antenna-theory.com/arrays/arrayfactor.php
The phase difference will be dependent on angle of incidence or transmitting angle..
phase_diff = 2πdsinθ/λ


 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top