Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Are the push buttons already debounced in Xilinx FPGAs?

Status
Not open for further replies.

aqcy

Newbie level 3
Joined
Oct 14, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
Hi guys, i was wondering if the Xilinx development boards' push buttons are already debounced? I am working with a Xilinx Virtex4 FX12 LC board now.. i can't find any information about it weather if the push buttons on it are already debounced.. does anyone know?
 

Xilinx FPGAs

What is "LC"? Do you mean the new Xilinx HW-V4-ML403 board? On that board, the buttons and switches go straight into the FPGA. Not debounced. See schematic:
https://www.xilinx.com/products/boards/ml403/docs.htm

Does your board have the 8-position DIP switch installed? They forgot to install it on mine.
 

Re: Xilinx FPGAs

Hi all!

Has anybody of you worked with the MEMEC FX12 Board?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top