[General] Arduino - nRF24L01(Transceiver)

[K Srinivas Pavan Kumar]

Hi friends
I want the two microcontrollers to be communicated via nRF24L01(Transceiver)
Can any one guide me in this with the help of code

At Transmitter side I want to use
Arduino Pro Mini Board
nRF24L01
potentimeter
5v Power supply

At Receiver side :
Arduino uno Board
nRF24L01
3.3v Power supply

1 Breadboard between these two
I will the power through Receiver side

 

[pasicr]

Hi Kumar,
https://starter-kit.nettigo.eu/2014...mming-nrf24l01-with-arduino-and-other-boards/
good starting point...
regards

 

[K Srinivas Pavan Kumar]

Hi, I have tried your code .
The transmitter side it is working fine but I don’t know whether it is transmitting or not, and at receiver side it is showing me this error can anyone can solve this issue
At transmitter side I have used Arduino pro mini
At receiver side I used Arduino Uno

and how can we check it is transmitting or not without the help of receiver ?
avrdude: stk500_recv(): pravrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x35

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x35