Hi,
Again its a new problem. Yesterday, I have solved the problem of detection of controller. Yesterday I got succeed to detect the controller. But when I tried it today morning, the problem is as it is.
I have done nothing. Yesterday, I read in one forum that try to reduce the frequency and at the zero frequency I mean very low frequency, we may program the controller. So that I reduced the frequency and got succeed, but today morning, I continued my work with same set up, again the problem is as it is. I do not have done anything. I just connect the jumpers again and then started to burn the program in controller as I have set the fuse yesterday, the controller gives the following error as before :
avrdude.EXE: error: programm enable: target doesn't answer. 1
avrdude.EXE: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude.EXE done. Thank you.
It is irritating me now and I could not find a single fault why it is happening, and I am really feeling helpless now.
Because yesterday, everything was perfect and I was getting error of Application timeout so left the effort to solve and my friend told me that it might be the problem of RESET.. So I decided to do that by today and when today I start to work continue, I got the same error. Before I solved the problem, I was getting error due to wrong connection.
I really need someone to help me.
Please help me otherwise I will get mad......!!!:-
-
-(
Thanks.
Chirag