Aoyue 908 - Temperatures Chart

[brunofunchas]

Hi,

I have an Aoyue 908 and I would like to know if anyone has a chart where we could see the position of the two knob for each type of electronic component, e.g.:

Capacitor: "Air flow" in position 3 And Heater in position 4.

Resistor: "Air flow" in positon 2 And Heater in positon 4

I would like to know also the temperatures that I shoul use.

Picture of the station:

don't post links to eshops, they are considered spammed advertisement.
Link to eshop replaced with picture of the product [alexan_e]

Thanks in advance,
Bruno

---------- Post added at 17:06 ---------- Previous post was at 16:55 ----------

Hi,

Another question about thus equipment:

When I connect the power cord the diaphragm pump starts to work immediately, even if the two switches of the station are turned off!

Is this normal operation?

Thanks in advance,
Bruno

 

[alexan_e]

I had the same question a while ago,
https://www.edaboard.com/threads/195093/

You have to experiment , there is no correct solution.
I use it for de-soldering only, for me a temperature of about 380° with an airflow of about 4-5 works fine

Alex

 

[brunofunchas]

Thanks for the input.