Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Any ICs suggestion for 868MHz Transmitter & Receiver?

Status
Not open for further replies.

Mac7978

Member level 2
Joined
Oct 17, 2003
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
377
Hi all,

I am going to design a pair of Tx and RX at 868MHz. Can anyone suggest me a chip for this purpose?

I prefer the chip use ASK as it can save half of power, also the current consumption is as low as possible.

Thank You

Best rgds.

Macccccc
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

ASK modulation:
**broken link removed**
**broken link removed**

FSK modulation:
**broken link removed**
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

ASK/FSK Transciever TH7122 from Melexis

h**p://www.melexis.com
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

Venture Technologies makes a board with a Micrel RF500 and a microprocessor onboard. Works well.
**broken link removed**
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

If you want to go for a standardised solution, try the IEEE 802.15.4 devices:
**broken link removed**
or ATMEL
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

chipcon has transceivers some of them are in ZigBee™ family
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

bilgekaan said:
chipcon has transceivers some of them are in ZigBee™ family

Yes, but none at 868MHz :)

All the best
 

Re: Any ICs suggestion for 868MHz Transmitter & Receiver

from chipcon web site

A true single-chip narrowband RF Transceiver
The CC1020 is the industry's first single-chip FSK/ASK CMOS RF transceiver that meet the stringent requirements of multi-channel narrowband applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD ( Short Range Device) frequency bands at 426, 429, 433, 868 and 915 MHz, but can easily be programmed at other frequencies in the 402-470 and 804-940 MHz range

Added after 2 minutes:

they have wide operation bands

CC1050 Single chip ultra low power RF Transmitter for the 315/433/868/915 MHz SRD Band
CC1021 A multichannel FSK/ASK CMOS RF transceiver for narrowband applications, with channel spacings of 50 kHz or higher, in the 402-470 and 804-940 MHz range
CC1020 The industry's first single-chip FSK/ASK CMOS RF transceiver for narrowband applications in the 402-470 and 804-940 MHz range
CC1010 The industry's first integrated 300-1000 MHz RF Transceiver and microcontroller
CC1000 Single chip ultra low power RF Transceiver for the 315/433/868/915 MHz SRD Band
CC900 Single Chip High Performance RF Transceiver, 800-1000MHz
CC400 Single Chip High Performance RF Transceiver, 300-500MHz
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top