Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ansys HFSS COM Engine non-responsive

Status
Not open for further replies.

phen3x

Newbie level 5
Joined
Sep 28, 2013
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
79
Hello all,

I have a problem with Ansys Electronics Desktop 16.2. When I try to simulate a model, the COM engine starts but immediately becomes unresponsive. The error I get in the message window is:
[warning] Com Engine non-responsive since 22:23:31, September 08, 2015. Can be due to CPU intensive processing or network problems. If persisting for long, manually kill the com engine process and restart analysis. Retrying..... (10:24:31 PM Sep 08, 2015)
[error] Machine localhost: Engine terminated unexpectedly, or machine reported error or was inaccessible. (10:25:31 PM Sep 08, 2015)


Any ideas? I am running HFSS on windows.

Thanks in advance!
J.

-------------------UPDATE
I have tested the current machine configuration and it fails because it "Cannot connect to RSM service". The service is running normally though...
 
Last edited:

gpalomino

Newbie level 4
Joined
Sep 8, 2015
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
23
Hi,

This problem is because you don't have conection with the machine that give you license.
 

sc4rppph

Newbie level 6
Joined
Jul 22, 2012
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Korea
Activity points
1,350
HFSSDesign1 (DrivenModal)
[warning] Com Engine non-responsive since 14:59:59, November 11, 2015.
Can be due to CPU intensive processing or network problems.
If persisting for long, manually kill the com engine process and restart analysis. Retrying.....
(3:00:59 ¿ÀÈÄ 11 11, 2015)
[error] Machine Local Machine: Engine terminated unexpectedly or machine reported
error or was inaccessible. (3:01:58 ¿ÀÈÄ 11 11, 2015)


I am also getting error as mentioned above in Ansys Electronics desktop 16.2. Can anyone tell me, how to solve this error.
 

sc4rppph

Newbie level 6
Joined
Jul 22, 2012
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Korea
Activity points
1,350
I have also same issue. can you guide me how to resolve this issue.

Thanks for you help.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top