Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

analog digital conversion

Status
Not open for further replies.

Akramin84

Newbie level 6
Joined
Feb 24, 2009
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,355
hi there, I'm using TI microprocessor to make analog digital conversion.however
the microprocessor only provide 15 ADC pin. I need more pin ADC. Can I used
external ADC ic and connect the output to the Microprocessor ? anybody here can suggest any microprocessor with more number of ADC pin .
 

sivamit

Full Member level 4
Joined
Dec 1, 2005
Messages
202
Helped
20
Reputation
40
Reaction score
14
Trophy points
1,298
Activity points
2,664
Akramin84 said:
hi there, I'm using TI microprocessor to make analog digital conversion.however
the microprocessor only provide 15 ADC pin. I need more pin ADC. Can I used
external ADC ic and connect the output to the Microprocessor ? anybody here can suggest any microprocessor with more number of ADC pin .

Hi Akram,
Try analog devices or ti website.Withour giving any other information like sampling rate, clock freq ,(+/-)Vref,no of channels..etc.. it is very difficult for others to give you some hint.
Either give more details on the requirements part or make a search..

https://www.analog.com/en/analog-to-digital-converters/products/index.html

Regards,
Sharon
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top