Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Analog and Digital Amplitude Modulation

Status
Not open for further replies.

Hitesh.Chawla

Newbie level 3
Joined
Jan 17, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
The bandwidth of the modulated signal is twice the bandwidth of the modulating signal in case of analog amplitude modulation..
But in the case of digital modulation (ASK), the bandwidth of the resulting signal is equal to the Baud rate. How the two cases are different from each other ?
 

ASK bandwidth is given by this formula
B=(1+d)*S
where
B is the bandwidth
S is the signal rate
d is between 0 and 1 (depend on modulation and filtering)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top