Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Altium PLCC68 Socket footprint

Status
Not open for further replies.
M

majsta

Newbie level 4
Newbie level 4
Joined
Jan 30, 2011
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,350
It is easy to create PLCC68 Socket, but this one is not standard one. It has Through Hole Vertical Termination and it needs to be mounted at the bottom side of pcb. I have no idea how to create this socket. I was thinking about creating footprint just with holes. Here is some info about socket also there are DXF, IGES, STEP files. Can i use them to create footprint ?
1-822473-6 Product Details - TE
 

And what seems to be your problem? You've got all the information required to do the footprint yourself, even 3D model.
 
Last edited:
  • Like
Reactions: majsta

    M

    majsta

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top