It means that you can configure the internal oscillator to use a "base clock" with frequency lying between 31kHz and 8MHz. You can also use PLL functionality on the internal oscillator to achieve higher clock frequency. Eg 32MHz from the internal oscillator configured as 8MHz.
Thanks, regarding on I2C Protocol, how do i initialize it ? if i use different chips to build programs can i still use the same file repeatedly over and over again?
:Tahmid, PicDem Board 02-01630-1 Year 2002 and PicDem Board 02-01630-1 Year 2010.
Is there any difference between them ? Other LEDs Size and colour of the board?
the layout of the board and the connections are the same am i right ??
Thanks, regarding on I2C Protocol, how do i initialize it ? if i use different chips to build programs can i still use the same file repeatedly over and over again?
Due to the large number of chips availalbe, it would be difficult to make a generaralization. I don't think you can use the same code for each and every controller out there. You should go through the datasheets of the chips you are planning to use and compare the I2C modules of each. If you are, however, using a compiler library function, code portability will be better and atleast, the I2C functions can be (usually) reused.
:Tahmid, PicDem Board 02-01630-1 Year 2002 and PicDem Board 02-01630-1 Year 2010.
Is there any difference between them ? Other LEDs Size and colour of the board?
the layout of the board and the connections are the same am i right ??
Regarding PICDem, I'll have to take a look. If you have the relevant product datasheets or manuals, please link to them or upload them. If you don't, it's okay; I can find them through Google.
Due to the large number of chips availalbe, it would be difficult to make a generaralization. I don't think you can use the same code for each and every controller out there. You should go through the datasheets of the chips you are planning to use and compare the I2C modules of each. If you are, however, using a compiler library function, code portability will be better and atleast, the I2C functions can be (usually) reused.