ADS parameter sweep trace color

Status
Not open for further replies.
N

Nhera

Member level 1
Joined
Oct 12, 2015
Messages
36
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
293
When I perform a parameter sweep in ADS, the traces are always the same color. I cant even lick on an individual trace. Is there a way to make the traces resulting from different parameters easier to distinguish?

 

Double Click the curve, "Trace Options"->>Linear->>Line Color ( tick the box)
 
Reactions: Nhera

    N

    Nhera

    Points: 2
    Helpful Answer Positive Rating
Thank you, it works.
 

BigBoss said:
Double Click the curve, "Trace Options"->>Linear->>Line Color ( tick the box)
Click to expand...

Another question, if I manually change a parameter and simulate again, is it possible to have the previous traces to be overlaid with the newly simulated trace?
 

Nhera said:
Another question, if I manually change a parameter and simulate again, is it possible to have the previous traces to be overlaid with the newly simulated trace?
Click to expand...

Have a look at the "History" menu in the ADS data display.
 

volker@muehlhaus said:
Have a look at the "History" menu in the ADS data display.
Click to expand...

It works, but the history trace is a very thick blue line. I could not find where to edit the trace color+thickness
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…