Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADS design : Amplifier designing dbt

Status
Not open for further replies.
D

dili Neo

Junior Member level 2
Joined
Aug 21, 2012
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,405
hi
i am trying to trouble shoot an amplifier design.I have a layout with 50 ohm line and two dc blocking capacitance in series and two shunt quarter wave lines (converting short ckt to RF open ckt ) for biasing amplifier. Amplifier i/p and o/p impedance are 50 ohm.once i simulated it in agilent ADS my o/p gain variation is not uniform over my freq range 3.1 to 3.5 GHz(showing a fluctuation of even 5 db,max gain of ampr is only 11.5 db).Wat shall be the error and hw can i eliminate it. How to trouble shoot it



thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top