Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[ADS] ADS simulation not using graphic card memory

Status
Not open for further replies.

pragash

Advanced Member level 2
Joined
Jul 4, 2005
Messages
512
Helped
64
Reputation
128
Reaction score
59
Trophy points
1,308
Location
Oakland
Activity points
4,939
im doing momentum or EM simulation in ADS. however, my graphic card memory is not used in the simulation. that graphics card is stated in ADS simulation acceleration and full fill the acceleration requirement. how to make the graphic card memory to used in Em simulation and accelerate the EM simulation?
 

GPU acceleration is only available when using the FDTD solver in EMPro. It is not available when using Momentum.

Transient Convolution can also use GPU acceleration.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top