Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Adjacent Channel Measurement of GSM EDGE

Status
Not open for further replies.
M

MK28

Advanced Member level 4
Joined
Mar 7, 2005
Messages
119
Helped
10
Reputation
20
Reaction score
7
Trophy points
1,298
Activity points
2,120
Hi all,

I need a specfications for Adjacent Channel Measurement of GSM EDGE...i have the specs for GMSK mod., but not for 8PSK mod.......Can anyone provide the specs. for 8PDK mod.?
 

Re: Adj. Chan

Hi,

Take a look in the following link **broken link removed** to radio aspects.
I hope this helps.

Regards.
 

Re: Adj. Chan

GSM Adjacent Channel Rejection specification at 200kHz from the carrier is the same for GMSK or 8PSK modulations (9dB above the wanted signal).
 

Re: Adj. Chan

Hi Vfone,

I am sure about your answer. I think that these specifications depend upon the coding schemes and the fading profile.
Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top