Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

AD7705 ADC issue reg processing delay

Status
Not open for further replies.

GOWRISHANKARSL

Newbie level 5
Joined
Jan 16, 2013
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,347
I am using AD7705 ADC in my project.It uses SPI communication to communicate with micro controller.It is taking 100ms to sense the data from micro controller.
1.Is there is any ADC ic which uses SPI interface,sensing time as 50ms,2 channel input,same specification of that of AD7705?
2.Is there is any way to decrease the time from 100ms to 50 ms for the same AD7705?


I am using AD7705 IC for my A to D conversion.It is taking 100ms to sense the signal from the micro controller.Is there is any way to decrease the sensing time from 100ms to 50ms...help me to fix this issue
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top