Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Actual Speed of USB2.0 & Firewire

Status
Not open for further replies.

Sobakava

Full Member level 6
Joined
Mar 27, 2002
Messages
350
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
3,342
firewire actual speed

What can I expect from USB2.0 (spec. speed 480Mbit/s) ? I need 377Mbit/s device to PC. Can isochronous mode of USB2.0 handle this in a good P4 PC under Win2K?

Is Firewire (IEEE1394a spec. speed 400Mbit/s ) better for this or not?
 

usb 2 actual speed

Sobakava said:
What can I expect from USB2.0 (spec. speed 480Mbit/s) ? I need 377Mbit/s device to PC. Can isochronous mode of USB2.0 handle this in a good P4 PC under Win2K?

As always this depends on many factors.
First you must have a usb chip which can handle that speed
Cypress for example has DMA capabilities.
Next you need to be a very smart driver programmer to handle such high data rates

I think 16 to 20 MBytes / sec is doable with Usb2.0

Note also that 377 MBit/sec on a single ISO device is vorbitten by the spec and iso mode is currendly not supported by most USB2 chips.

usbman
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top