Acde model parameter in Hspice

Status
Not open for further replies.
S

Salt

Newbie level 2
Joined
May 5, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Hello all,

I was wondering what the adce parameter in the Hspice model card was referring too. I have it set to the default 1 and I am getting a warning during simulation:

Warning: Acde = 1 may be too small in BSIM4 model pmos with w=9e-006 l=4.5e-008.

Can i just ignore this warning (thought I hate doing that)? This is a 45nm BSIM4 card. Thanks!
 

I'm facing the same issue here with a 32nm and a 22nm BSIM4 cards. Please let me know if you have figured this issue out!

Thanks,
 

I have encountered this warning massage too in 65nm Peredictive Technology Model.
Is there any one who can guide us?

Thanks in advance
Oveis
 

Even i face the same problem in 90nm Technology is there any one who could help us

Warning: Acde = 1 may be too small in BSIM4 model n12.1 with w=2.5e-07 l=1e-07.

Thanks inadvance
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…