Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Access time for SD card

Status
Not open for further replies.
mehtadhaval

mehtadhaval

Member level 3
Joined
Sep 15, 2010
Messages
56
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,288
Activity points
1,616
I am trying to access SD card with P89V664 (8051 based controller with 2kB RAM and 64kb flash).

Can anyone help me?

Also, what is the fastest access time for single byte, because I need a very low access time....
 

The NXP controller you are using must have a SPI interface. Just get the spec of SD card from web and hook up the SD card pins to the uC. Initialize the SPI interface at a slow clock rate 1-2MHz first (will be easy to debug).
At the max. you can expect 20usec of access time for the first byte and it should come down to say about 200nsec for the remaining sector.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top