Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

AC Simulation for SC Circuits in spice

Status
Not open for further replies.

sumit_techkgp

Full Member level 2
Joined
Apr 1, 2007
Messages
133
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Activity points
1,866
hspice ac simulation

Hello All,
We use pac to analyze the ac response of switch cap circuits in spectre. Is there any
way to analyze ac-response of switch caps in spice ?
Best Regards,
Sumit
 

sumit_techkgp said:
Hello All,
We use pac to analyze the ac response of switch cap circuits in spectre. Is there any
way to analyze ac-response of switch caps in spice ?
Best Regards,
Sumit

Yes, it´s possible with SPICE.
For this purpose you have to replace each S/C unit with a time continuous analogon.
There are specific tables how the different switch arrangements are replaced.
The analog replacements can be modelled with delay lines or controlled sources.
The procedure is described, for example, in
Ghausi/Laker: Modern Filter Design - Active RC and Switched Capacitor.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top