Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about tool for Analog and Digital design

Status
Not open for further replies.
C

chetan477

Newbie level 6
Joined
Jun 24, 2009
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
surat
Activity points
1,369
Can I use same tool for Both Design Analog and Digital.......basically....I am making SRAM ......so cell is Digital...and periphery is analog........

I am using Mentor.......IC station for SRAM Cell


Regards
chetan
 

You mean you consider cell as digital and sense amplifier as analog. If so it is absolutely wrong approach. You should simulate both of them as analog.
 

Please guide me if u know the flow. I have done till DRC check in CALIBER.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top