Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

about the STA reports,thank you!

Status
Not open for further replies.

lubee

Junior Member level 2
Junior Member level 2
Joined
Oct 4, 2007
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,398
In the course of the post-P&R simulation,especially in the STA, I often come across a problem in the STA reports,as the following:
the report :
Point Incr Path
input external delay 10.00 10.00r
a(in) 0.00 10.00r
m1/Z(MUX21H) 1.00 11.00r
c_d/Z(AN2) 1.00 12.00r
so,I don't know what the "r" in the "Path" column stands for,sometimes "f".

thank you in advance.
 

r=rise
f=fall

At the o/p of each cell in your report, prime-time puts these attributes(i.e r or f) to tell you weather it is a rising arc or falling timing arc.
Kr,
Avi
http://www.vlsiip.com
 

thank you so much!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top