Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

About the CPW port in Ansoft Designer

Status
Not open for further replies.

Jian-Qiang Gong

Junior Member level 1
Joined
Oct 11, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
cpw ansoft designer

How to setup a port with its references for a CPW with finite ground in Ansoft Designer?
 

Jian-Qiang Gong

Junior Member level 1
Joined
Oct 11, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
ansoft designer cpw

The port setup for cpw located on the inifinite ground plane is very easy, for there is coplanar port in designer,but for a cpw with finite ground is not very easy, one should setup reference ground for the source port. Is there anyone who ever had such a experience?
 

red-sun

Newbie level 6
Joined
May 13, 2005
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,482
cpw ansoft

use microwave port covering the whole region of the CPW port.
 

Jian-Qiang Gong

Junior Member level 1
Joined
Oct 11, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
port with reference ansoft designer

Thanks for your reply red-sun.Could you explain the port setup method in detail, for example ,by using a picture.
 

Jian-Qiang Gong

Junior Member level 1
Joined
Oct 11, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
Why?Is there anyone can help me or give some advice?
 

fishyxl

Member level 3
Joined
Dec 1, 2004
Messages
61
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Activity points
425
There is a ppt on the website of ansoft company, which explained the setting of CPW port.
 

pj83

Newbie level 5
Joined
May 13, 2011
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,329
I need this ppt for setting my ports....could you give me ?
 

sv1437

Full Member level 6
Joined
Sep 5, 2008
Messages
350
Helped
103
Reputation
204
Reaction score
99
Trophy points
1,308
Location
US
Activity points
3,109
Hi fishyxl,

I think that ppt in Ansoft website is for setting CPW ports in HFSS, not in Ansoft Designer.

-sv
 

pj83

Newbie level 5
Joined
May 13, 2011
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,329
Thank you....if you have some suggestion to this purpose, i will be happy !
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top