I am a recruit to orcad capture.i want do some simulation with PSPICE,but i can ont find the simulation model for the device-qvb11334.i also look for the model on the web site 'www.orcad.com',but i can not find it too.you guys,who have the simulation lib give me some advice or send it to my email "higildedzest@hotmail.com". you also can tell the site on which i can get the pspice IC simulation lib.
thank you very much.
The default Pspice libraries are kept under ./tools/capture/library/pspice...If you can not find a model under this location then you need to probably look out for Spice model for the mentioned model.
SPICE model can be available on net or you have to request to the vendor for the same.Once you have the model, Model Editor in Pspice can be used to create an .olb from this and then the part can be placed in Shematic
The default Pspice libraries are kept under ./tools/capture/library/pspice...If you can not find a model under this location then you need to probably look out for Spice model for the mentioned model.
SPICE model can be available on net or you have to request to the vendor for the same.Once you have the model, Model Editor in Pspice can be used to create an .olb from this and then the part can be placed in Shematic
thank you very much.i can not find the model on net,but i know that there are many people find the model on the company web site which product the chipn or device.can you tell me how can i do?thank you again.