Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

About pic usart Serial communication

Status
Not open for further replies.

chair_man

Junior Member level 2
Joined
Mar 3, 2011
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,528
DEAR FRIENDS,

i want to establish communication between PIC and PC , then with PIC to GSM module , i'm working with PIC16F887.

In PIC 16F887 there is an USART that we can use to establish serial communication , but the question is , can use just this controller for two serial communications.

The messages that comes from the PC is sending back into the GSM module (trought AT Commands), that will be sent by SMS.

Can this PIC do this Job or i have to replace it , or add other device that can switch communication between each serial communication.

Thanks For All.
 

Dear ckshivaram ,

As you told me on electronic mail , please see the file attached that contains all the C and Header files.

Thanks For your Support.
 

Attachments

  • C And H files.rar
    4.7 KB · Views: 64

Sorry Wrong place where i post
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top