Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about pad in layout, please help me

Status
Not open for further replies.
L

lhlbluesky

Banned
Joined
Mar 30, 2007
Messages
558
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Location
china
Activity points
0
in I/O cell, in some case, we use two pads in an I/O cell, and the two pads connect together, i want to know, what is the benifit of two pads relative to a single pad in an I/O cell? and when should we use two pads instead of a single pad in I/O cells? thanks all.
 

1. Current over bond wire limitation (e.g. max. 400mA over 25µm bond wire).
2. To decrease pad + bond wire resistance or inductance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top