Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about library file in Tanner EDA

Status
Not open for further replies.
F

FARRUKHKHAN

Newbie level 5
Newbie level 5
Joined
Jan 14, 2015
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
66
I am tryng to design the Analog Amplifier in Tanner EDA the probem is that the base paper is on .18um BSIM3v3 as i know because of .18 um technology the MOS Channel length should be .18um but in base paper the author writes a line for the sake of simplicity he takes 1 um MOS channel length and i am unable to chage the channel length from 0.18um to 1 um i am using PTM 180nm model file although i am maintaning the same W/L ratio but my Gain is differ so what to do and why writers take 1 um channel length if they are using 0.18 nm technology and why i am unable to increase my channel length.......i am in big trouble plz help
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top