Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

about level shift circuit ...

Status
Not open for further replies.

jerry117

Newbie level 1
Joined
May 26, 2003
Messages
0
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,282
Activity points
101
Except using level shift IC, is there any circuit that can meet 1.8V translate to 2.8V logic?

Please provide circuit knowledge that inclue how to treat logic input and output circuits. Thanks.
 

Any logic input running off the 2.8V supply, but that is tuned for a very low threshold voltage (i.e. 1.0V threshold) will do the job. Only draw-back is that you have to live with a DC shoot-through current, which you can reduce with a series resistor with the supply. The series resistor will trade off speed with DC current consumption.

Greg
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top