Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A Question About Oscilloscope

Status
Not open for further replies.
T

Teg-Men

Junior Member level 2
Joined
Sep 22, 2010
Messages
24
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Ankara
Activity points
1,468
In digital scopes, portion of the signal during the time before trigger event is
displayed. How do these scopes achieve this result?

Thank you?
 

They continually sample the data and store it - not just after a trigger. When there is a trigger they simply mark when the trigger occurred.

Keith
 
I thought that there will be two reasons:
1. Auto Mode would be opened,
2. Normal Mode, the signal reached trigger points.
Your idea will also be considered.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top