Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

A/B access switch to CF-card, please help

Status
Not open for further replies.

domu

Newbie level 4
Joined
Sep 5, 2005
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,333
Let's say that we have CF-card, and we have two devices that
need to have full R/W access to it, one device at the time.
Hence we would need a simple circuit that control access to
CF card either from device A or device B.

Note: dynamic switching is not needed. Switching can be done
at reset, ie. at the press of the button MCU simply memorizes
that another device should have granted access, and enables
access to that device after reset.

Please give me your thoughts how would you approach this
problem.

Any helpful answers much appreciated.

Thank you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top