Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for schematic of AVR 40 pin ZIF socket

Status
Not open for further replies.
W

wakaka

Full Member level 4
Joined
Dec 7, 2005
Messages
237
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,298
Activity points
2,931
Hi all, I've seen many DIY AVR ISP programmers only brought out the MOSI,MISO,SCK,RST and GND pins.
Is there any schematic for a 40pin socket(connected to MOSI,MISO,SCK,RST,GND,Vcc) that is able to program diff pins series of AVR (40pin, 28pin, 18pin......) ?

Thanks
 

Re: AVR ZIF socket

Hai wakaka

There wont be such a thing because the pin positions vary widely from chip to chip (As there are now lot of new features and variants).

If You want you can make it one (not so tough). But it would be costiler than and parallel programmer.

Regards
Nandhu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top