Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

93LC46B I/SN Pickit 2 hookup

Status
Not open for further replies.

XtremeTuningSolutions

Member level 1
Joined
Jun 7, 2009
Messages
35
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
2,131
pickit 2 pinout

Hi all
I need to read/write to Microchip's 93LC46B (SOIC-8) and I was wondering if anyone had the pinout to use the Pickit 2? What is the pin to pin conversion?



Thank You

Marc
 

pickit 2 pin layout

It's in the PicKit2 readme file:


Code:
       Connections for 93LC devices
        ---------------------------------------
        PICkit 2 Pin             93LC Device Pin (DIP)
        (1) VPP                  1 CS
        (2) Vdd                  8 Vcc
        (3) GND                  5 Vss
        (4) PGD                  4 DO
        (5) PGC                  2 CLK
        (6) AUX                  3 DI
                                 7 PE - enabled (Vdd)
                                 6 'C' Device ORG 
                                    Set to select word size

Check the pin names in case the SOIC pin-out is different from the DIP one.

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top