Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

90s2313 and attiny2313

Status
Not open for further replies.

pkedvessy

Member level 5
Joined
Feb 17, 2005
Messages
81
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
2,077
90s2313

Hy all!

Till now, I used 90s2313, and now I want to use attiny2313.
The base problem is: how I can programme the new chip?
I used Fun-card programmer, with IC-Prog 1.05D to programming the 90s2313 chip, and I'd like to know, can I use it with the tinny2313?

Thank for your answer!

Added after 1 minutes:

Here is the programmer's schematic: https://www.serasidis.gr/circuits/avrprog/avrprog.htm
 

avreal programmer

Hi, you can use the same hardware with the AVReAl software, because the FUN card programmer doesn't support the tiny2313, look at here for the AVReAl programmer http://ln.com.ua/~real/avreal/index_e.html and in adapters sections look at FBPRG, good luck :D

ps: the bed side is that AVReAl is command-line program
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top