Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

8Mbit flash memory size is enough ?

Status
Not open for further replies.

ricky_wcy

Junior Member level 3
Joined
May 22, 2005
Messages
29
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,537
Is it enough to use 8x1Mbit flash memory to store all the following data

1. Total data = 200
2. Each Data format = Year (4 digit) + Month (2 digit) + Date (2 digit) + No.of count (5 digit)
3. All digits are in decimal
 

(4+2+2+5) * 200 => 2600 (bytes) or half of it if you put each digit into one nibble (2 nibbles per byte) ..

Size required:
2.6k x 8
Available:
8M x 8

Regards,
IanP
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top