Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

800-900MHz Local Oscillator

Status
Not open for further replies.

Thinh

Junior Member level 2
Joined
Mar 31, 2002
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
70
oscillator 900mhz

Hello,

Would you please tell me some Local Oscillator operating at :

870 ± 30 Mhz
error ±5Khz

Mixer at this range with minimum signal power at -132dB (or tell me about some LNA for this range compensation)

Thanks for advances

Thinh Phan
 

i donot know what your -13dBm power means,in fact M/COM,minicircuit
all has the VCO works at the 800M-900M,so it is not a problem,so in the common way,you use the PLL to get the LO you wanted,may be -135dBc is the right,then it represent the phase noise
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top