raman00084
Full Member level 6
what is the maximum operating frequency of 74hc14 in data sheet i cannot locate it. does it support 500 khz frequency
regards
kalyan
regards
kalyan
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
74hc14 operating frequency range
- Thread starter raman00084
- Start date
- Status
xenos
Full Member level 4
Have a look at figure 6. Parameter is propagation delay and depends on Voltage (lower voltage, slower responce).
**broken link removed**
This is the critical parameter (if the time you are reading it's output, the output is stable).
The frequence you want is very low for such an IC. Of course it handles this (in every usable voltage).
**broken link removed**
This is the critical parameter (if the time you are reading it's output, the output is stable).
The frequence you want is very low for such an IC. Of course it handles this (in every usable voltage).
Warpspeed
Advanced Member level 5
- Joined
- May 23, 2015
- Messages
- 2,291
- Helped
- 766
- Reputation
- 1,534
- Reaction score
- 760
- Trophy points
- 1,393
- Location
- Melbourne, Australia
- Activity points
- 19,703
Yes it will do 500 Khz easily.
- Status
