Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

64 byte Intel hex format for flash programming

Status
Not open for further replies.
H

hock

Advanced Member level 2
Joined
May 28, 2001
Messages
524
Helped
47
Reputation
94
Reaction score
21
Trophy points
1,298
Location
India
Activity points
3,567
I want in-system programming of Atmel flash AT29c256 which is mapped from 0000 H to 8000 H. I am planning to use internal ram to store the 64 byte page and then program the flash in page mode. Can some one tell me how I can 16 byte Intel hex format to 64 byte Intel hex format? Can it be done using keil oh51 or some similar tool?
hock
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top