Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

4 Switch Non-inverting Buck-Boost Converter

Status
Not open for further replies.

emaq

Member level 4
Joined
Sep 17, 2015
Messages
78
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,288
Activity points
2,001
I was wondering if there is some example code for the digital control of a 4 switch non-inverting buck-boost converter available to start with... preferably implemented using Arduino Uno or Arduino Mega.
 

It might be true for analog but the digital implementation has a huge provision for specs!
yes but specs are only as good as the assumptions and the breakdown of all hierarchical inputs, process and outputs from the macro to the nanoscale and how that is documented. e.g. HIPO method and the environmental conditions and initial conditions.,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top