Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

4 Switch Non-inverting Buck-Boost Converter

emaq

Member level 4
Joined
Sep 17, 2015
Messages
77
Helped
0
Reputation
0
Reaction score
1
Trophy points
8
Activity points
703
I was wondering if there is some example code for the digital control of a 4 switch non-inverting buck-boost converter available to start with... preferably implemented using Arduino Uno or Arduino Mega.
 

SunnySkyguy

Advanced Member level 5
Joined
Sep 26, 2007
Messages
6,918
Helped
1,700
Reputation
3,398
Reaction score
1,688
Trophy points
1,413
Location
Richmond Hill, ON, Canada
Activity points
51,311
It might be true for analog but the digital implementation has a huge provision for specs!
yes but specs are only as good as the assumptions and the breakdown of all hierarchical inputs, process and outputs from the macro to the nanoscale and how that is documented. e.g. HIPO method and the environmental conditions and initial conditions.,
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top