penoy_balut
Full Member level 2
pic16 sms controller
simply extract text data from phone which is in PDU format then convert to ASCII to get the message
alexhohth84 said:bbbb said:Hi
1. Look in the following website; you can find RX and TX pins on the connector.
https://pinouts.ru/CellularPhones-P-W/erics_t28_pinout.shtml
2. another solution is to use the DATA CABLE of the phone set and connect it to you uC baord (which must have a TTL to RS232 converter as well). Now you uC board acts as PC and it can be connected to many phones using different DATA cables.
actually i wan where i can found the solution that use the data cable. My main purpose of this project the nokia 3310 connect it with a pc. it will automatic send the sms it receive to pc without delay just like a sms gateway.
Actually the Fbus is good project but not suitable for me because i still got alot others part need to do. i cant just concentrate at sms part only. but really thanx alot for u all opinion
simply extract text data from phone which is in PDU format then convert to ASCII to get the message