Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

3 way LED lamp circuit

Status
Not open for further replies.

txrxno

Newbie level 1
Joined
May 23, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
i am in need of help for this project that i am doing, i did this schematic that is suppose to work as a 3 way LED lamp circuit. (for example, first push on ob switch turns on 1 LED, 2nd push is 2 LEDs, 3rd is all LEDs and 4th will turn off all the LEDs). Unfortunately, my circuit is not working in the way i wanted it to. instead, only 1 LED lights up before i turn on the switch of pb switch. I am trying to avoid using any ICs for this project. What can i do to rectify the probleM? here is my schematics.
<a title="Transitor circuit.png" href="http://obrazki.elektroda.pl/5522048800_1400851296.png"><img src="http://obrazki.elektroda.pl/5522048800_1400851296_thumb.jpg" alt="Transitor circuit.png" /></a>
Thanks!:)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top