Nov 25, 2020 #1 R r2axz Newbie Joined Nov 25, 2020 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 12 Hi, I'd like to share my 3-port USB-to-Serial adapter firmware project for STM32 Blue Pill (STM32F103C8T6). Features: 3 independent UART ports; Hardware flow control (RTS/CTS) support1; DSR/DTR/DCD signals support; 7 or 8 bit word length; None, even, odd parity; 1, 1.5, and 2 stop bits; Works with CDC Class drives on Linux, OS X, and Windows; Supports all standard baud rates; Supports non-standard baud rates; DMA RX/TX for high-speed communications; IDLE line detection for short response time; Signed INF driver for Windows XP, 7, and 8; Built-in command shell for device parameters configuration; No external dependencies other than CMSIS; Open-source, MIT license, source code and binary releases are available at https://github.com/r2axz/bluepill-serial-monster
Hi, I'd like to share my 3-port USB-to-Serial adapter firmware project for STM32 Blue Pill (STM32F103C8T6). Features: 3 independent UART ports; Hardware flow control (RTS/CTS) support1; DSR/DTR/DCD signals support; 7 or 8 bit word length; None, even, odd parity; 1, 1.5, and 2 stop bits; Works with CDC Class drives on Linux, OS X, and Windows; Supports all standard baud rates; Supports non-standard baud rates; DMA RX/TX for high-speed communications; IDLE line detection for short response time; Signed INF driver for Windows XP, 7, and 8; Built-in command shell for device parameters configuration; No external dependencies other than CMSIS; Open-source, MIT license, source code and binary releases are available at https://github.com/r2axz/bluepill-serial-monster