Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] CST works with Intel iCore

Status
Not open for further replies.

cstutp

Newbie level 2
Joined
Aug 4, 2010
Messages
2
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,292
Hi everyone,

I just want to share my finding. I was having problems with my CST 2009 to work with Intel i7. It keep giving me "solver HF TD AMD64" error. Just now I found out that CST will run, IF you un-check the parallelization in the Transient solver->special->solver.

When I run the simulation, it still use 4 core (check with task manager performance).

Hope this help someone like me.

regards,
 

Hi,

Yes, it works. But when simulating transmission S21 two antennas reports error (CST 2009): Render Engine Error: Matrix calculation crashed while executing multiple threads. Caught unhandled exception (check for race conditions). Error in calculating solver matrix. What happened?
Here is my notebook LENOVO Z570 conf:
CPU Name: Intel(R) Core(TM) i5-2430 CPU @ 2.40GHz
Memory information: 4GB RAM
NVIDIA® Geforce® GT540M 2GB graphics
OS information: Microsoft Windows 7 Home Premium 64 Bit version

>cstutp:please try to simulate two antennas.
Regards.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top