230V to 12V AC supply

[siddharthtaunk]

Hi,

Can anyone please help me with 230V to 12V AC transformer design notes. No. of turns and other parameters

My input is 230V

I need output 12V with 1000mA current

Thanks in advance.

SID

 

[pplus]

You wish to buy the core, a wire and to reel up both windings?
Or at you is ready and you wish to change a secondary winding under the own requirements?
If the second - reel up 100 coils and measure the voltage, after this count the required number of coils. D(m)=0.8*sqrt(I(a))=0.8mm

 

[siddharthtaunk]

You wish to buy the core, a wire and to reel up both windings?
Or at you is ready and you wish to change a secondary winding under the own requirements?
If the second - reel up 100 coils and measure the voltage, after this count the required number of coils. D(m)=0.8*sqrt(I(a))=0.8mm

To be precise I want the whole design notes from the scratch. For example:
1. How to select the core?
2. What should be the primary and secondary windings?
etc.

Siddharth

 

[pplus]

To be precise I want the whole design notes from the scratch.

https://www.giangrandi.ch/electronics/trafo/trafo.shtml